AWS E6013
Vertical Down Welding Electrode
For Mild Steel
AWS A5.1-2004: E6013
ASME SFA-5.1:E6013
BS EN ISO 2560-B-E 4313 A
GB/T5117 E4313
Introduction:
AWS E6013 (J421D) is a kind of carbon steel electrode, for welding of the mild steel,especially used for sheet metal vertical down welding. AC or DC. All-position welding. It has excellent operating performance, easy re-strike, easy slag removal and stable arc, it has smooth and clean weld appearance.
Application:
Suitable for welding general carbon steel and zinc-coated steel sheets for ships, especially suitable for vertical downward welding and intermittent welding on thin plates.
Chemical Composition of Deposited Metal (%)
Mechanical Properties of Deposited Metal
X-Ray Radiographic Inspection: Grade II
Size and Recommended Welding Current (AC or DC)
Notice: Normally the welding electrode does not need to re-bake in case it is affected with damp seriously re-bake it at 150ºC for 30-60 minutes before use.
Packing: 5kg/box, 4boxes/carton, 50cartons/pallet. 21MT -26MT per 1X20" FCL.
Vertical Down Welding Electrode
For Mild Steel
AWS A5.1-2004: E6013
ASME SFA-5.1:E6013
BS EN ISO 2560-B-E 4313 A
GB/T5117 E4313
Introduction:
AWS E6013 (J421D) is a kind of carbon steel electrode, for welding of the mild steel,especially used for sheet metal vertical down welding. AC or DC. All-position welding. It has excellent operating performance, easy re-strike, easy slag removal and stable arc, it has smooth and clean weld appearance.
Application:
Suitable for welding general carbon steel and zinc-coated steel sheets for ships, especially suitable for vertical downward welding and intermittent welding on thin plates.
Chemical Composition of Deposited Metal (%)
| C | Mn | Si | S | P | |
| Guarantee Values | ≤0.12 | 0.3-0.6 | ≤0.35 | ≤0.035 | ≤0.040 |
| Typical Values | 0.068 | 0.39 | 0.28 | 0.018 | 0.021 |
Mechanical Properties of Deposited Metal
| Test Item | Tensile Strength Rm(Mpa) | Yield Strength ReL(Mpa) | Elongation (%) | KV2 (J) | KV2 (J) |
| Guarantee Values | ≥420 | ≥330 | ≥17 | Normal Temperature | 0ºC |
| Typical Values | 490 | 400 | 28 | 50-80 | ≥47 |
X-Ray Radiographic Inspection: Grade II
Size and Recommended Welding Current (AC or DC)
| Size (mm) | 2.0x300 | 2.5x300 | 3.2x350 | 4.0x400 | 5.0x400 |
| Current(A) | 40-70 | 60-90 | 80-130 | 130-210 | 170-280 |
Notice: Normally the welding electrode does not need to re-bake in case it is affected with damp seriously re-bake it at 150ºC for 30-60 minutes before use.
Packing: 5kg/box, 4boxes/carton, 50cartons/pallet. 21MT -26MT per 1X20" FCL.