Sub Arc Agglomerated Welding Flux Sintered Flux SJ301
Technical Data Sheet
1.Specification:
AWS-A5.17 F6A0-EL8 F7A2-EM12K EN760 SA CS 1 89 AC H5
2.Description:
SJ301 is an agglomerated calcium-silicate type welding flux. Basicity: 1. 0 (B//W) It is gray and round grain,mesh:10-40.Regularly shaped welds are deposited without reduction of area or interface notches. Slag detachability is good. A short slag is produced, thus allowing circumferential welding on small-diameter workpieces without the risk of uncontrolled slag. The production of large pipes(especially spiral pipe welding) is a typical application for this flux. Relatively high manganese pick-up is obtained,thus allowing the flux to be used with wires with a low Mn content.
(3)Applications:
The flux is fit for the submerge-arc welding of low-carbon steel and low-alloy steel. Butt and flat fillet welding of miniature LPG tanks pipeline steel,ships,vehicles,agricultural implements,machinery,boilers,bridges,structural steels.
(4)Chemical Composition(%)
(5)Mechanical Performance of the Deposited Metal
(6)The Instruction of usages:
Re-dried under 300-350ºC for 2 hours.
Rust,grease and moisture on the weldment should be removed before welding.
Product Picture
Application of Submerged Arc Welding Flux
1.Spiral Welded Steel Pipe
2.Steel Structure & H Beam Steel
3.LPG Cylinder &Gas Cylinder Body
4.Hardfacing& Roll Reclamation
5.Vehicles &Ships&Briages
Packing & Shipping
(1)Bag:25 KGS/Kraft Bag With Plastic Lining Inside
(2)Pallet:40 Bags(1 Ton)/Plywood Pallet
(3)Container:20-24 Tons/Container
(4)OEM Packing Design Can Be Accept According To Your Requirement
Factory Workshop & Product Line
Company Brief Introduction
1.Company Name:LaiWu HuLin Welding Material Co.,Ltd
2.Company Website:hlweldingflux.en.made-in-china.com
3.Main Products:
(1)Submerged Arc Welding Flux
(2)Welding Wire
4.Best Selling Product Models:
(1)Welding Flux:SJ101,SJ101G,SJ102,SJ301,SJ501,HJ107,HJ260,HJ431
(2)Welding Wire:ER70S-6
5.Quality System:ISO9001:2000
6.Year Established:1999
7.Brand Name:Panding Brand
8.Annual Capacity:
(1)12000 metric tons of agglomerated flux
(2)10000 metric tons of fused flux
FAQ
1.Are you a factory or a trading company?
LaiWu HuLin Welding Materials Co., Ltd. is a professional factory of welding wire&welding flux.
2.Is OEM available?
Yes, OEM is available.
3.Is the sample available?
Yes, free samples are available for you to test the quality.
4.What about the price terms?
CIF, CFR, FOB
5.How about the payment terms?
(1)30% T/T in advance, 70% balance against B/L copy.
(2)L/C at sight.
6.What about the delivery time?
Within 7 days after receipt Of payment.
7.What is the MOQ?
One Ton.
8.What about the package?
Forward Welding Package/Neutral Package/OEM Package
Technical Data Sheet
1.Specification:
AWS-A5.17 F6A0-EL8 F7A2-EM12K EN760 SA CS 1 89 AC H5
2.Description:
SJ301 is an agglomerated calcium-silicate type welding flux. Basicity: 1. 0 (B//W) It is gray and round grain,mesh:10-40.Regularly shaped welds are deposited without reduction of area or interface notches. Slag detachability is good. A short slag is produced, thus allowing circumferential welding on small-diameter workpieces without the risk of uncontrolled slag. The production of large pipes(especially spiral pipe welding) is a typical application for this flux. Relatively high manganese pick-up is obtained,thus allowing the flux to be used with wires with a low Mn content.
(3)Applications:
The flux is fit for the submerge-arc welding of low-carbon steel and low-alloy steel. Butt and flat fillet welding of miniature LPG tanks pipeline steel,ships,vehicles,agricultural implements,machinery,boilers,bridges,structural steels.
(4)Chemical Composition(%)
SiO2+TiO2 | Al2O3+MnO | CaO+MgO | CaF2 | S | P |
25-35 | 30-40 | 15-25 | 5-15 | ≤0.05 | ≤0.05 |
(5)Mechanical Performance of the Deposited Metal
Wires | Standard Models | Yield Point Rel(MPa) | Tensile Strength Rm(MPa) | Elongation A (%) | Impact Value Kv2(J) |
EL8 EM12K | F6A0-EL8 F7A2-EM12K | ≥350 ≥410 | 415-550 480-650 | ≥22 ≥30 | ≥40(0ºC) ≥60(-20ºC) |
(6)The Instruction of usages:
Re-dried under 300-350ºC for 2 hours.
Rust,grease and moisture on the weldment should be removed before welding.
Product Picture
Application of Submerged Arc Welding Flux
1.Spiral Welded Steel Pipe
2.Steel Structure & H Beam Steel
3.LPG Cylinder &Gas Cylinder Body
4.Hardfacing& Roll Reclamation
5.Vehicles &Ships&Briages
Packing & Shipping
(1)Bag:25 KGS/Kraft Bag With Plastic Lining Inside
(2)Pallet:40 Bags(1 Ton)/Plywood Pallet
(3)Container:20-24 Tons/Container
(4)OEM Packing Design Can Be Accept According To Your Requirement
Factory Workshop & Product Line
Company Brief Introduction
1.Company Name:LaiWu HuLin Welding Material Co.,Ltd
2.Company Website:hlweldingflux.en.made-in-china.com
3.Main Products:
(1)Submerged Arc Welding Flux
(2)Welding Wire
4.Best Selling Product Models:
(1)Welding Flux:SJ101,SJ101G,SJ102,SJ301,SJ501,HJ107,HJ260,HJ431
(2)Welding Wire:ER70S-6
5.Quality System:ISO9001:2000
6.Year Established:1999
7.Brand Name:Panding Brand
8.Annual Capacity:
(1)12000 metric tons of agglomerated flux
(2)10000 metric tons of fused flux
FAQ
1.Are you a factory or a trading company?
LaiWu HuLin Welding Materials Co., Ltd. is a professional factory of welding wire&welding flux.
2.Is OEM available?
Yes, OEM is available.
3.Is the sample available?
Yes, free samples are available for you to test the quality.
4.What about the price terms?
CIF, CFR, FOB
5.How about the payment terms?
(1)30% T/T in advance, 70% balance against B/L copy.
(2)L/C at sight.
6.What about the delivery time?
Within 7 days after receipt Of payment.
7.What is the MOQ?
One Ton.
8.What about the package?
Forward Welding Package/Neutral Package/OEM Package