Graphite Electrode Graphite Electrode HP Graphite Casting Electrode

ItemUnitTechnical Data RPHPUHP≤∅400mm≥∅450mm≤∅400mm≥∅450mm≤∅400mm≥∅450mmSpecific ResistivityBodyμΩ.m 7--8.5 7.5-8.5 6--6.5 6.2--7          4.5--6.0Nipple            4---5    &nb

Featured Products

Item



Unit
Technical Data 
RPHPUHP
≤∅400mm≥∅450mm≤∅400mm≥∅450mm≤∅400mm≥∅450mm



Specific Resistivity
Body


μΩ.m


 7--8.5


 7.5-8.5


 6--6.5


 6.2--7


          4.5--6.0
Nipple            4---5            3.8--5                 3--4
Bulk DensityBody

g/cm3
1.55--1.601.65--1.701.66--1.72
Nipple1.72--1.771.74--1.781.77--1.82


Flexural Strength
Body


Mpa
8.5--9.58.0-8.510.5--1312--15
Nipple17--2218--2321--28


Elastic Modulus
Body

Gpa
8--910--129--14
Nipple10--1410--1610--18
CET(100-600ºC)Body

x10-6/ºC
2.1--2.42.0--2.31.0--1.4
Nipple2.0--2.31.8--2.00.9--1.3


Ash
Body

    %
≤0.4≤0.3≤0.2
Nipple≤0.2≤0.2≤0.2


 

Instructions of usage for Graphite Electrode:

Notes of usage:


1.To Place the nipples, first use compressed air to clean the hole, then carefully screwed the nipples into it (do not damage the thread).
2.To connect the electrodes, when there's 20-30mm distance between the two electrodes, using compressed air to clean the two extremes.
3.Connector locations should be selected c-map.
4.When use the wrenches to connect electrodes, should be fully tighten to specified torque.
5.To avoid electrode broken, please remove the insulating material in the furnace.
6.To avoid electrode broken, pls. place the big block in the lower and smaller block at the upper.
We can manafacture and export graphite electrodes in different grade ,shape and dimension.Whenever you need it ,please feel free to let us know.we promise you the top quality and lower price. 

Graphite Electrode Graphite Electrode HP Graphite Casting Electrode
Graphite Electrode Graphite Electrode HP Graphite Casting Electrode
Graphite Electrode Graphite Electrode HP Graphite Casting Electrode
Graphite Electrode Graphite Electrode HP Graphite Casting Electrode

Packing & Shipping:

1.Bale package, customers can choose weight for each bale.
2. 20mt/20'fcl, 25mt/40'fcl
3.With payment terms of your choice,30% deposit and 70% before delivery.
4.delivery time:We put your order into our tight production schedule, ensure your punctual delivery time.Have the inspection before your order is packed
Quantity(Tons)1 - 25>25
Est. Time(days)15To be negotiated


FAQ
1.What metal do you supply?
We supply Aluminum ingot, Scrap copper wire, Scrap aluminum wire, Scrap hub ,Magnesium ingot,Zinc ingot,etc. Please write to us for what you are looking for, we"ll send you our recently price for your reference.

2.Do you provide samples for customer checking the quality?
Yes we supply samples with free, 1 KG is available for quality check and market test, delivery time within 2 days, ship by air transport door to door. You just need to pay the courier cost.

3.What's the delivery time? Do you have products in stock?
Yes we have quantitative products in stock. Accurate delivery time depends on your detailed quantity, usually about 7-15 days.

4.What is your terms of delivery?
We accept FOB, CFR, CIF, etc. You can choose the most convenient way for you. 

5.Notice
The price on Made in China is a rough price.Actual price will depend on the raw materials and your order quantity. Any problems please contact us without hesitation.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours