Technical data sheet
Esab OK 10.71 Submerged Arc Welding Flux SJ101G
Specifications:
AWS A5.17/5.23 F7A2-EM12K F7A4-EH14 F7A6-EG-G F8A4-EA4-A4
EN760 SA FB 1 55 AC H5
Description:
SJ101G is an agglomerated fluoride-basic type flux. Basicity: 2.0 (B//W) It is gray and round grain,mesh:10-45(2.0-0.4mm). It can highly satisfy the steel welding requirements for oil gas pipeline. Either AC. or DC.can be used, the wire shall be connected to positive pole when applying DC. It has steady arc and the welding bead smooth and pleasing , rice weld formation, and easy in slag removing as well with perfect deposit metal welding technological characteristics. It has higher low-temperature impact toughness and high crack resistance.
It should be re-dried under 300-350ºC for 2 hours. Rust,grease and moisture on the weldment should be removed before welding.
Usage:
Matching with suitable welding wires (H08C,H08MnA,H10Mn2,H08MnMoA,H08Mn2MoA),it can weld many kinds of steel pipes,such as X52,X60,X65,X70,X80,etc.It also can be used in 16Mn,Q345C etc structural steel submerged arc welding.
Chemical Composition(%)
Mechanical Performance of the Deposited Metal
Attention:
1. We get values in data sheets from tests carried out in accordance to AWS and GB standard procedure. They only represent values we get under those conditions. They are not to be taken as guarantees. AS to welding ,individual test results may depending on experience & technique, flux type, base metal, joint preparation, flux preparation, ampere, voltage, etc.
2. If welding fluxes are stored in improper environment or influenced by condensed moisture, anyway, they get damp, please dry them at 300-350 for 2 hours before usage.
3. Please clean the rust,oil,water on base metal before welding.
4. Add minimum 20% new flux when using recovered flux to avoid welding defects and maintain welding performance & mechanical properties.
5. Please control parameters properly, like preheat temperature, interpass temperature,cooling rate.
Products Picture:
Company Brief Introduction
(1)Company Name:Shandong Hulin Welding Material Co.,Ltd
(2)Main Products:
SAW Flux&Wire, MIG Wire, FCW wire.
(3)Best Selling Product Models:
SAW Flux:SJ101,SJ101G,SJ102,SJ301,SJ501,HJ107,HJ260,HJ431
SAW Wire: EM12K,EL8,EL12
MIG Wire: ER70S-6
FCW Wire: E71T-1
(5)Quality System:ISO9001:2000
(6)Year Established:1999
(7)Brand Name:Panding Brand
(8)Application: Steel Pipe, Structural steel, LPG Cylinder, Pressure vessel, Boiler, Bridges etc.
Packing & Shipping Details:
(1)Bag:25 KGS/Kraft Bag With Plastic Lining Inside
(2)Pallet:40 Bags(1 Ton)/Plywood Pallet
(3)Container:20-24 Tons/Container
(4)OEM & buyer label is ok, and technical support can be offered
FAQ:
Q. 1 Can you provide free sample?
A: Total free sample(including freight cost) can be offered
Q. 2 What is your delivery time?
A: Within 7 days after receiving deposit.
Q: 3 Is your price competitive with other companies?
A: Our goal is to give the best price with same quality and best quality with the same price. We do everything we can to reduce your cost.
Q. 4 How about OEM?
A: OEM IS OK.
Q. 5 Why we should choose your company?
A: Firstly, we are ORIGINAL factory. We can guarantee delivery time and provide special requirements for customers.
Secondly, we have professional foreign trade team with high efficiency communications and professional solutions.
Thirdly, we have special team work for after sales services 24*7 to help you slove any kind of problem
Contact us:
Esab OK 10.71 Submerged Arc Welding Flux SJ101G
Specifications:
AWS A5.17/5.23 F7A2-EM12K F7A4-EH14 F7A6-EG-G F8A4-EA4-A4
EN760 SA FB 1 55 AC H5
Description:
SJ101G is an agglomerated fluoride-basic type flux. Basicity: 2.0 (B//W) It is gray and round grain,mesh:10-45(2.0-0.4mm). It can highly satisfy the steel welding requirements for oil gas pipeline. Either AC. or DC.can be used, the wire shall be connected to positive pole when applying DC. It has steady arc and the welding bead smooth and pleasing , rice weld formation, and easy in slag removing as well with perfect deposit metal welding technological characteristics. It has higher low-temperature impact toughness and high crack resistance.
It should be re-dried under 300-350ºC for 2 hours. Rust,grease and moisture on the weldment should be removed before welding.
Usage:
Matching with suitable welding wires (H08C,H08MnA,H10Mn2,H08MnMoA,H08Mn2MoA),it can weld many kinds of steel pipes,such as X52,X60,X65,X70,X80,etc.It also can be used in 16Mn,Q345C etc structural steel submerged arc welding.
Chemical Composition(%)
| SiO2+TiO2 | Al2O3+MnO | Ca O+MgO | CaF2 | S | P |
| 15-25 | 23-30 | 25-35 | 15-25 | ≤0.03 | ≤0.04 |
Mechanical Performance of the Deposited Metal
| WIRE | Yield Point Rel(MPa) | Tensile Strength Rm(MPa) | Elongation A (%) | Charpy V Notch Impact Strength KV2(J) | ||
| -20ºC | -40ºC | -50ºC | ||||
| EM12K | ≥400 | 490~660 | ≥22 | ≥60 | ||
| EH14 | ≥400 | 480~660 | ≥22 | ≥70 | ≥60 | ≥29 |
| EG | ≥460 | 530~690 | ≥22 | ≥90 | ≥80 | ≥42 |
| EA4 | ≥500 | 580~700 | ≥22 | ≥65 | ≥60 | ≥38 |
Attention:
1. We get values in data sheets from tests carried out in accordance to AWS and GB standard procedure. They only represent values we get under those conditions. They are not to be taken as guarantees. AS to welding ,individual test results may depending on experience & technique, flux type, base metal, joint preparation, flux preparation, ampere, voltage, etc.
2. If welding fluxes are stored in improper environment or influenced by condensed moisture, anyway, they get damp, please dry them at 300-350 for 2 hours before usage.
3. Please clean the rust,oil,water on base metal before welding.
4. Add minimum 20% new flux when using recovered flux to avoid welding defects and maintain welding performance & mechanical properties.
5. Please control parameters properly, like preheat temperature, interpass temperature,cooling rate.
Products Picture:
Company Brief Introduction(1)Company Name:Shandong Hulin Welding Material Co.,Ltd
(2)Main Products:
SAW Flux&Wire, MIG Wire, FCW wire.
(3)Best Selling Product Models:
SAW Flux:SJ101,SJ101G,SJ102,SJ301,SJ501,HJ107,HJ260,HJ431
SAW Wire: EM12K,EL8,EL12
MIG Wire: ER70S-6
FCW Wire: E71T-1
(5)Quality System:ISO9001:2000
(6)Year Established:1999
(7)Brand Name:Panding Brand
(8)Application: Steel Pipe, Structural steel, LPG Cylinder, Pressure vessel, Boiler, Bridges etc.
Packing & Shipping Details:
(1)Bag:25 KGS/Kraft Bag With Plastic Lining Inside
(2)Pallet:40 Bags(1 Ton)/Plywood Pallet
(3)Container:20-24 Tons/Container
(4)OEM & buyer label is ok, and technical support can be offered
FAQ:
Q. 1 Can you provide free sample?
A: Total free sample(including freight cost) can be offered
Q. 2 What is your delivery time?
A: Within 7 days after receiving deposit.
Q: 3 Is your price competitive with other companies?
A: Our goal is to give the best price with same quality and best quality with the same price. We do everything we can to reduce your cost.
Q. 4 How about OEM?
A: OEM IS OK.
Q. 5 Why we should choose your company?
A: Firstly, we are ORIGINAL factory. We can guarantee delivery time and provide special requirements for customers.
Secondly, we have professional foreign trade team with high efficiency communications and professional solutions.
Thirdly, we have special team work for after sales services 24*7 to help you slove any kind of problem
Contact us: