Why hand held fiber laser welding machine?
(1) The operation is simple: novice 1 day to learn to start, 1 week can become a skilled welding hand;
(2) Low maintenance: low consumables, no fillings, only need to change the protective lens;
(3) No harm to the individual: the laser is generally not exposed to the light, almost no harm.
(4) Low labor cost:
(5) Fast welding speed: the speed is several times of argon arc welding, argon arc welding 1:5 laser welding;
(6) Hand held laser welding is flexible, convenient and arbitrary angle welding;
(7) Non contact welding: no electrode is needed to meet the requirements of clean and environmental protection;
(8) No blowhole, no blowhole, burn through, weld through, etc;
(9) The welding seam is fine and beautiful, and the welding surface is smooth and smooth;
(10) The workpiece has no deformation, small heating range and very low distortion;
parameters:
(1) The operation is simple: novice 1 day to learn to start, 1 week can become a skilled welding hand;
(2) Low maintenance: low consumables, no fillings, only need to change the protective lens;
(3) No harm to the individual: the laser is generally not exposed to the light, almost no harm.
(4) Low labor cost:
(5) Fast welding speed: the speed is several times of argon arc welding, argon arc welding 1:5 laser welding;
(6) Hand held laser welding is flexible, convenient and arbitrary angle welding;
(7) Non contact welding: no electrode is needed to meet the requirements of clean and environmental protection;
(8) No blowhole, no blowhole, burn through, weld through, etc;
(9) The welding seam is fine and beautiful, and the welding surface is smooth and smooth;
(10) The workpiece has no deformation, small heating range and very low distortion;
parameters:
Laser power | 500W / 1000W / 1500W |
Laser wavelength | 1070nm |
Beam quality (BPP) | 5mmx mrad |
Fiber length | standard configuration of 5m can be extended to 15m |
Working mode | continuous / modulation |
Welding speed | 0-120mm / S |
Welding thickness | 0.5mm-3mm |
Weld requirements | ≤ 0.5mm (with welding wire structure, laser head can be up to 3mm) |
Working voltage | 220 VAC ± 10% 50 / 60Hz |
Working environment temperature | 10 ºC - 35 ºC |
Working environment humidity | < 70%, no condensation |
Cooling mode | industrial incubator |