Hard surface flux-cored coal scraper conveyor welding wire

Wodon abrasion resistant flux core welding wireHigh temperature resistant welding wireOur flux core welding wire with 1.2 mm, 1.6 mm 2.8 mm can be packed in 50 kg/Coil with waterpoof packing and Desiccant, or packed in 15 kg/Coil with vacuum packing. The Quality guarantee period are over one year in the dry condition. In ou

Featured Products

Wodon abrasion resistant flux core welding wire
Hard Face Flux Cored Coal Scraper Conveyor Welding Wire
High temperature resistant welding wire
Hard Face Flux Cored Coal Scraper Conveyor Welding Wire

Our flux core welding wire with 1.2 mm, 1.6 mm 2.8 mm can be packed in 50 kg/Coil with waterpoof packing and Desiccant, or packed in 15 kg/Coil with vacuum packing. The Quality guarantee period are over one year in the dry condition. In our Coils are no Joint, so that during the welding process will be no current interruption to break the welding process.
Abrasion resistant flux core wire
Our flux core welding wire with diameter 2.8 mm, 3.2 mm or 4.0 mm can be packed 100~250 kg/Drum without a joint.We guarantee good performance regarding no cleaning slag, low welding spatter, smooth surface, high welding efficiency and a transistion coefficient above 0.9.




Hard Face Flux Cored Coal Scraper Conveyor Welding Wire
Hard Face Flux Cored Coal Scraper Conveyor Welding Wire
We are certified with the ISO9001:2008 and keep continuously improving our quality management system. We have strict procedures for raw materials, products inspection, production process, storage management and after sales service.
We are certified with the ISO1400:2004 and keep continuously improving our environmental management system. We use the electric boiler not the coal fired boiler to protect the environmental. We use the advanced dust removal and ventilation equipment to keep the air clean.
We are certified with the OHSAS18001-2007 and keep continuously improving our occupational health and safety management system. Our every technical staff wears filter mask, protective clothing and gloves and welding goggles.

We have our own Quality Inspection Technology Department and the team are made of many experience exports with material science bachelor-degree and the leaders with material science master-degree. In the pictures you can also see our equipment in our laboratory. Our inspection team make regular testing on raw material, production process and our products according our company's strict policy.
In our Laboratory there are the Rockwell Hardness tester to test the Hardness of the small welding samples, the portable Spectrum to test the chemical compostion easily at the work pieces on the scene, the portable Hardness tester to test the Hardness easily at the work pieces on the scene and the portable ultrasonic thickness measurement instrument to test the thickness easily and accurate.
There are also abrasion resistance testing machine and a series of metallograhy experiment instruments, so the metallurgical microstructure and wear resistance can be tested.
The below picture shows our laboratory. There are many equipments to suppert our Quality Inspection Technology Department, for sample: a series of metallographic analysis equipments, protable spectrum, protable u
ltrasonic thickness tester, protable ultrasonic hardness tester, destop Rockwell hardness tester, Infrared carbon sulfur analyzer, Quartz sand rubber wheel abrasion test machine and Reciprocating abrasion tester.
Hard Face Flux Cored Coal Scraper Conveyor Welding Wire




 

Tianjin Wodon Wear Resistant Material Co., Ltd is located in Tianjin city, China's northern international shipping center. We are specialized in researching, developing and producing wear resistant products with many years experience in this field. We have more than 300 employees, with an annual output of 140000 squaremeters of wear plates and 9000 tons of welding consumables.
Hard Face Flux Cored Coal Scraper Conveyor Welding Wire






Packaging: Steel pallet, Non fumigation pallets, Plastic Film, Customized
Packaging Size: 1.4*3.4 m, 1.5*3 m, 2*3 m, 1.4*.3.0 m, 1.4*3.5 m, 2.1*3.5 m, customized.
Delivery Detail: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Loading into 20 ft or 40 ft container.
Hard Face Flux Cored Coal Scraper Conveyor Welding Wire


 

Q: Are you trading company or manufacturer ?

A: We are manufacturer with 4 factorys, our own sales department and our own inspection technology department.

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge.

Q: What is your terms of payment ?

A:30% T/T in advance ,balance against copy of BL. 

    also, FOB, CIF, CFR all are available for your product.

If you have another question, pls feel free to contact us as below:
Hard Face Flux Cored Coal Scraper Conveyor Welding Wire

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours