Panding Brand Submerged ARC Welding Flux SJ101 Produced by Laiwu Hulin Factory
Descripton:
LH-SJ501 is a bonded type acid flux composed mainly of aluminium and oxides with ball form granule about 10-60 mesh in size.Its basicty is 0.5-0.8.It can be used on AC or DC power source.It provides good welding usability,easy slag removal,excellent anti-porosity property and beautiful bead appearance.
Application:
In combination with H08A or H08MnA wire,this flux is suitable for welding of gascylinders,membrane water-cooled wall of boilers,ect.
Characteristics:
1)LH-SJ501 is an agglomerated aluminate- rutile type flux.
2.)Metallurgical behavior: High silicon and manganese pick- up is obtained.
3)Grain size: 10 to 60 mesh.Basicity: 0.7( BIIW).
4) The welding performance is excellent.
Slag detachability is very good, especially at high speed.
Welding porosity scarcely occur.
5.)Its welding speed can travel up to 150 cm/ min. It is particularly useful for welding tube- web- tube joints of finned tubes.
6)LH-SJ501 is useful for welding thin plate in single pass and limited pass.
7)The flux has low moisture pick-up and granular stability . As the bulk density is low so is the consumption rate.
Caution:
1.Damp flux should be re-dried at 300-350 Centigrade for 2 hours.
2.Rust, grease and moisture on the weldment should be removed before welding.
Chemical Composition(%)
Mechanical Performance of the Deposited Metal
Products Picture:
Company Brief Introduction
(1)Company Name:Shandong Hulin Welding Material Co.,Ltd
(2)Main Products:
SAW Flux&Wire, MIG Wire, FCW wire.
(3)Best Selling Product Models:
SAW Flux:SJ101,SJ101G,SJ102,SJ301,SJ501,HJ107,HJ260,HJ431
SAW Wire: EM12K,EL8,EL12
MIG Wire: ER70S-6
FCW Wire: E71T-1
(5)Quality System:ISO9001:2000
(6)Year Established:1999
(7)Brand Name:Panding Brand
(8)Application: Steel Pipe, Structural steel, LPG Cylinder, Pressure vessel, Boiler, Bridges etc.
Packing & Shipping Details:
(1)Bag:25 KGS/Kraft Bag With Plastic Lining Inside
(2)Pallet:40 Bags(1 Ton)/Plywood Pallet
(3)Container:20-24 Tons/Container
(4)OEM & buyer label is ok, and technical support can be offered
FAQ:
Q. 1 Can you provide free sample?
A: Total free sample(including freight cost) can be offered
Q. 2 What is your delivery time?
A: Within 7 days after receiving deposit.
Q: 3 Is your price competitive with other companies?
A: Our goal is to give the best price with same quality and best quality with the same price. We do everything we can to reduce your cost.
Q. 4 How about OEM?
A: OEM IS OK.
Q. 5 Why we should choose your company?
A: Firstly, we are ORIGINAL factory. We can guarantee delivery time and provide special requirements for customers.
Secondly, we have professional foreign trade team with high efficiency communications and professional solutions.
Thirdly, we have special team work for after sales services 24*7 to help you slove any kind of problem
Contact us:
Descripton:
LH-SJ501 is a bonded type acid flux composed mainly of aluminium and oxides with ball form granule about 10-60 mesh in size.Its basicty is 0.5-0.8.It can be used on AC or DC power source.It provides good welding usability,easy slag removal,excellent anti-porosity property and beautiful bead appearance.
Application:
In combination with H08A or H08MnA wire,this flux is suitable for welding of gascylinders,membrane water-cooled wall of boilers,ect.
Characteristics:
1)LH-SJ501 is an agglomerated aluminate- rutile type flux.
2.)Metallurgical behavior: High silicon and manganese pick- up is obtained.
3)Grain size: 10 to 60 mesh.Basicity: 0.7( BIIW).
4) The welding performance is excellent.
Slag detachability is very good, especially at high speed.
Welding porosity scarcely occur.
5.)Its welding speed can travel up to 150 cm/ min. It is particularly useful for welding tube- web- tube joints of finned tubes.
6)LH-SJ501 is useful for welding thin plate in single pass and limited pass.
7)The flux has low moisture pick-up and granular stability . As the bulk density is low so is the consumption rate.
Caution:
1.Damp flux should be re-dried at 300-350 Centigrade for 2 hours.
2.Rust, grease and moisture on the weldment should be removed before welding.
Chemical Composition(%)
| SiO2+TiO2 | Al2O3+MnO | CaF2 | S | P |
| 25-35 | 50-60 | 5-10 | ≤0.05 | ≤0.05 |
Mechanical Performance of the Deposited Metal
Wires | Standard Models | Yield Point Rel(MPa) | Tensile Strength Rm(MPa) | Elongation A (%) | Impact Value Kv2(J) |
| EL8 EL12 EM12K | F6Az-EL8 F7A0-EL12 F7A2-EM12K | ≥330 ≥330 ≥410 | ≥415 ≥420 ≥500 | ≥22 ≥22 ≥22 | ≥27(0ºC) ≥53(-18ºC) ≥45(-200ºC) |
Products Picture:
Company Brief Introduction(1)Company Name:Shandong Hulin Welding Material Co.,Ltd
(2)Main Products:
SAW Flux&Wire, MIG Wire, FCW wire.
(3)Best Selling Product Models:
SAW Flux:SJ101,SJ101G,SJ102,SJ301,SJ501,HJ107,HJ260,HJ431
SAW Wire: EM12K,EL8,EL12
MIG Wire: ER70S-6
FCW Wire: E71T-1
(5)Quality System:ISO9001:2000
(6)Year Established:1999
(7)Brand Name:Panding Brand
(8)Application: Steel Pipe, Structural steel, LPG Cylinder, Pressure vessel, Boiler, Bridges etc.
Packing & Shipping Details:
(1)Bag:25 KGS/Kraft Bag With Plastic Lining Inside
(2)Pallet:40 Bags(1 Ton)/Plywood Pallet
(3)Container:20-24 Tons/Container
(4)OEM & buyer label is ok, and technical support can be offered
FAQ:
Q. 1 Can you provide free sample?
A: Total free sample(including freight cost) can be offered
Q. 2 What is your delivery time?
A: Within 7 days after receiving deposit.
Q: 3 Is your price competitive with other companies?
A: Our goal is to give the best price with same quality and best quality with the same price. We do everything we can to reduce your cost.
Q. 4 How about OEM?
A: OEM IS OK.
Q. 5 Why we should choose your company?
A: Firstly, we are ORIGINAL factory. We can guarantee delivery time and provide special requirements for customers.
Secondly, we have professional foreign trade team with high efficiency communications and professional solutions.
Thirdly, we have special team work for after sales services 24*7 to help you slove any kind of problem
Contact us: