We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.
Electrodes fabricated from tungsten-lanthanum or TZM with a copper shaft (Figure 1) are able to tolerate the high stresses occurring in resistance spot welding. However, the welding quality is affected by the presence of cavities in the solder between the shaft and the electrode. Tests demonstrate that this issue can be avoided by using cast electrodes in place of soldered electrodes.
Figure 1. Electrodes with a copper shaft
Tungsten-lanthanum and the molybdenum alloy TZM have high melting points and high temperature stability. Rapid heat dissipation is a key characteristic of copper electrode holders. Nevertheless, with resistance welding, selecting the appropriate manufacturing process is as important as the material selection.
Figure 2. Microsections of a soldered electrode insert show the presence of cavities at the join between the base of the WL20 electrode and the copper shaft
Most manufacturers use a soldering process for joining TZM and copper. The uneven distribution of the solder at the join between the electrode holder and the electrode material leads to cavities, which have an impact on the thermal conductivity and electrical resistance in the event of welding.
Figure 2 depicts the microsections of a soldered electrode insert, clearly showing the presence of cavities at the join between the copper shaft and the base of the WL20 electrode. In addition, the welding quality can vary when electrodes are replaced.
PLANSEE does not use any soldering processes for resistance welding production, but rather employs a casting process to fabricate its tungsten-lanthanum and TZM electrodes with copper in a vacuum.
The electrode is completely enclosed by the molten copper, thereby forming a flawless join between the two materials. There is no change in the welding parameters during electrode replacement. Moreover, the process extends the service life of the electrodes.
Figure 3. Microsections of a cast WL20 electrode from PLANSEE
Figure 3 illustrates the micro sections of a cast WL20 electrode from PLANSEE, showing no cavities. The PLANSEE team are experts in the material properties of cast welding electrodes for resistance spot welding applications.
This information has been sourced, reviewed and adapted from materials provided by PLANSEE.
For more information on this source, please visit PLANSEE.
Please use one of the following formats to cite this article in your essay, paper or report:
PLANSEE. (2020, June 15). A Comparison of Soldered and Cast Electrodes for Spot Welding Applications. AZoM. Retrieved on May 27, 2022 from https://www.azom.com/article.aspx?ArticleID=9950.
PLANSEE. "A Comparison of Soldered and Cast Electrodes for Spot Welding Applications". AZoM. 27 May 2022. <https://www.azom.com/article.aspx?ArticleID=9950>.
PLANSEE. "A Comparison of Soldered and Cast Electrodes for Spot Welding Applications". AZoM. https://www.azom.com/article.aspx?ArticleID=9950. (accessed May 27, 2022).
PLANSEE. 2020. A Comparison of Soldered and Cast Electrodes for Spot Welding Applications. AZoM, viewed 27 May 2022, https://www.azom.com/article.aspx?ArticleID=9950.
Do you have a question you'd like to ask regarding this article?
In this interview, AZoM talks to Chris Aylott, Senior Engineer at Newcastle University, about fatigue testing in the development of low carbon transport solutions.
AZoM speaks with Dr. Nicola Ferralis from MIT about his research that has developed a low-cost process of creating carbon fibers from hydrocarbon pitch. This research could lead to the large-scale use of carbon fiber composites in industries that have thus far been limited.
In this interview, AZoM speaks with Marco Enger, Senior Tribologist from GGB, to discuss how nano fillers affect transfer films within tribological systems.
This product profile outlines the Versa Flex Checkweighers from Thermo Fisher Scientific.
The LQA 300 FT-IR wine analyzer combines performance, accuracy, ease-of-use, and speed for the analysis of finished wine, must and must under fermentation samples in less than 45 seconds—all in one compact solution.
The SpectraStar™ XT-R Benchtop NIR can analyze virtually any sample type in less than a minute, including solid, slurry, or liquid samples.
AZoM.com - An AZoNetwork Site
Owned and operated by AZoNetwork, © 2000-2022